Free · local measurements · source-backed
Which xTool work area fits your project?
Compare common sheet-sized designs or enter your own rectangle. Check exact work areas, P2S support configurations and rotation before choosing a machine.
- 13 current profiles
- in + mm
- shareable result
- no account
Which xTool fits a 12 × 12, 12 × 20 or 12 × 24 inch project?
Compare the full design rectangle—not just whether a physical sheet can be loaded. These examples allow a 90° rotation, use exact metric specifications, and exclude conveyors and fixtures. “Within area” is geometry only.
| Reviewed configuration | 12 × 12 in | 12 × 20 in | 12 × 24 in |
|---|---|---|---|
| P2S · standard slats | Within area · only 0.2 mm spare* → | Within area · only 0.2 mm spare* → | Exceeds this work area → |
| P2S · original honeycomb | Exceeds this work area → | Exceeds this work area → | Exceeds this work area → |
| P2S · original honeycomb in riser | Exceeds this work area → | Exceeds this work area → | Exceeds this work area → |
| S1 · 40W module | Within area → | Exceeds this work area → | Exceeds this work area → |
| M2 · 10W/20W flat laser | Within this configuration† → | Exceeds this work area → | Exceeds this work area → |
*Almost no tolerance: 12 inches is 304.8 mm, leaving just 0.2 mm total spare against a 305 mm axis—not 0.2 mm on each side. That does not prove edge-to-edge processing will work.
Why a 24-inch design is not a 600 mm design
A full 24-inch design spans 609.6 mm, exceeding the P2S standard 600 mm work-area axis by 9.6 mm. A 600 × 300 mm design is different from a 12 × 24 inch design. Try both presets, then check any conveyor or repositioning plan separately.
Support and module choices change the answer
The P2S standard slats area is 600 × 305 mm. xTool documents 556 × 280 mm for its original honeycomb panel in the machine, and a maximum 500 × 250 mm when that panel is in the riser base. These numbers do not describe every third-party support. Official P2/P2S honeycomb guide ↗
The S1 row is specifically the 40W module’s 498 × 319 mm area; the 20W module differs. Official S1 guide ↗ †The M2 row uses the documented 426 × 320 mm flat-laser area for 10W/20W modules, not the smaller multi-processing area. The guide also documents 426 × 312 mm for M2 40W; choose that module in the checker below and confirm regional availability with xTool. Official M2 user guide ↗ See the bundle work-area guide for three worked examples.
For smaller engraving fields, try a custom rectangle in the checker and compare the F2, F1 Ultra and F2 Ultra configurations. Once a candidate remains, use the room-fit finder, setup-cost builder and xTool buying options to complete the decision.
Check a real project rectangle.
Measurements stay in this browser unless you explicitly enable a dimension-bearing creator share link. Results are ordered by dimensional fit and smallest documented work area—not by commission.
3 documented dimensional matches
A geometric match is only the beginning. Review the evidence and unresolved conditions for the exact configuration.
This passes only model selections—not your dimensions or material answer. Recheck the exact module, support and project requirements in each profile.
- OMTech Maker AF2028-60fits dimensionally19.7 × 27.6 in / 500 × 700 mmTotal spare: 175.0 × 375.0 mm
The entered rectangle fits the published flat work area in the entered orientation.
- OMTech Maker MF2028-100fits dimensionally19.7 × 27.6 in / 500 × 700 mmTotal spare: 175.0 × 375.0 mm
The entered rectangle fits the published flat work area in the entered orientation.
- xTool P3 80W CO₂fits dimensionally36.0 × 18.0 in / 915 × 458 mmTotal spare: 590.0 × 133.0 mm
The entered rectangle fits the published flat work area in the entered orientation.
Review sources · Check this machine in my room
Documented xTool optionThe entered rectangle fits this reviewed work-area geometry. Confirm material, configuration and all room requirements before ordering.
Check current price and bundles at xTool →Paid link. LaserRoomReady may earn a commission; it does not change the result or price. - xTool F2 15W diode + 5W IRunresolved4.5 × 4.5 in / 115 × 115 mm base field
The entered rectangle does not fit the published flat work area in the checked orientations. The xTool Slide Extension publishes a 115 × 400 mm work area, but this calculator does not claim that the project can be indexed or processed successfully.
- xTool F2 Ultra UV 5Wunresolved7.9 × 7.9 in / 200 × 200 mm surface field
The entered rectangle does not fit the published flat work area in the checked orientations. The compatible conveyor publishes a 200 × 500 mm work area, but this calculator does not claim that the project can be indexed or processed successfully.
- xTool F1 Ultraunresolved8.7 × 8.7 in / 220 × 220 mm base field
The entered rectangle does not fit the published flat work area in the checked orientations. The Auto Streamline Conveyor publishes a 220 × 500 mm work area, but this calculator does not claim that the project can be indexed or processed successfully.
- xTool F2 Ultra Dual 60W MOPA + 40W diodeunresolved8.7 × 8.7 in / 220 × 220 mm base field
The entered rectangle does not fit the published flat work area in the checked orientations. The Auto Streamline Conveyor publishes a 220 × 500 mm work area, but this calculator does not claim that the project can be indexed or processed successfully.
- xTool F2 Ultra Single 60W MOPAunresolved8.7 × 8.7 in / 220 × 220 mm base field
The entered rectangle does not fit the published flat work area in the checked orientations. The Auto Streamline Conveyor publishes a 220 × 500 mm work area, but this calculator does not claim that the project can be indexed or processed successfully.
- xTool S1 40Wunresolved19.6 × 12.6 in / 498 × 319 mm
The entered rectangle does not fit the published flat work area in the checked orientations. A compatible oversize-feed path is documented, but this calculator does not claim that the project can be indexed or processed successfully.
- xTool P2S 55W CO₂unresolved600 × 305 mm · Standard slats
The entered rectangle does not fit the published flat work area in the checked orientations. A compatible oversize-feed path is documented, but this calculator does not claim that the project can be indexed or processed successfully.
Original honeycomb configurations have smaller processing areas. Confirm the selected support and processing mode.
- OMTech K40+ 45Wconflict7.9 × 11.8 in / 200 × 300 mm
The entered rectangle does not fit the published flat work area in the checked orientations. Oversize-feed capability was not reviewed for this profile.
- xTool M2 10W / 20Wconflict426 × 320 mm · M2 10W / 20W
The entered rectangle does not fit the published flat work area in the checked orientations. The current evidence does not support a conveyor path for this model.
Processing dimensions are documented in the M2 user guide. Confirm the exact purchasable module, region, processing mode, and support; the FAQ module list is incomplete.
- OMTech Polar Lite 55Wconflict20.1 × 11.8 in / 510 × 300 mm
The entered rectangle does not fit the published flat work area in the checked orientations. Oversize-feed capability was not reviewed for this profile.
Saves only a shortcut. Reopen it from the homepage; answers and measurements are not saved.
Boundary: Geometry only. A rectangle fitting a published work area does not establish material compatibility, settings, usable edge margin, fixture clearance, processing success, ventilation, electrical readiness, or safety.
“Fits” means one rectangle fits another.
The checker does not deduct clamping, framing, camera, focus, fixture, border, or processing margins. It does not decide whether a material or process is appropriate. A conditional oversize-feed note is not a claim that a long project can be processed successfully.
For cylinders, handled objects, or irregular shapes, use the rotary fit wizard or record a site-specific fixture envelope.
Share the calculation, not a screenshot.
The optional URL records only the project dimensions, units, rotation choice, P2S support configuration and M2 module choice. Creators can copy a compact badge that sends readers back to a reproducible result. Link to this common-size comparison chart when discussing sheet sizes; no account or permission request is needed.
Not sure why the module or support changes the answer? See seven documented xTool bundle work areas and three worked examples.
Before treating a match as a shortlist
Does work-area fit prove material compatibility?
No. Material identity, coatings, adhesives, process, settings, emissions, and manufacturer instructions remain separate decisions.
Are paid links ranked higher?
No. Results sort by outcome, then documented work-area size. Commission eligibility never changes the geometry.
A fit is not a room plan.
Carry a candidate into the scaled workshop layout and document the support and operating envelope.