Desktop laser profile
xTool F2 15W diode + 5W IR
A record based on manufacturer sources for room and delivery planning. It does not certify the room, circuit, ventilation, material, or fire-safety setup.
Direct answer: the recorded closed body is 6.89 × 9.33 × 13.15 in / 175 × 237 × 334 mm; the unopened package is not fully published for a general current shipment. Operating clearance remains a separate check.
- Published envelope recorded
- Profile reviewed
- No inferred package or clearance values
The published machine envelope
6.89 × 9.33 × 13.15 in / 175 × 237 × 334 mm
Manufacturer-published assembled envelope.
10.14 lb / 4.60 kg
Verify the complete operating load and supporting surface separately.
4.53 × 4.53 in / 115 × 115 mm; 4.53 × 15.75 in / 115 × 400 mm with Slide Extension
Processing area is not the required room footprint.
Not published in cited sources
Published shipping weight: Not published in cited sources. Confirm the exact bundle before delivery.
15 W 445 nm blue-light diode + 5 W 1064 nm infrared
Use current manufacturer guidance for the exact material and process.
Class 4
Match the ordered and delivered model to its current instructions and site controls.
120 mm published maximum; available height decreases when a rotary is used
A published maximum is not an operating clearance, material approval, focus guarantee, or proof a fixture will fit.
Requirements to carry into the site plan
Route and connection
65 mm smoke-exhaust pipe; route, termination, and any purifier configuration require separate confirmation
Nameplate input
Power-adapter input 100–120 VAC, 50/60 Hz; machine input 25 VDC, 6 A; 150 W maximum machine input
Cooling components
No external water-cooling requirement stated in cited sources
Access in use
No numeric operating, bystander, service, hose-bend, cable, or accessory clearance published in cited sources.
Open checks remain part of the answer.
Get the shipping dimensions.
Not published in cited sources. Ask the seller or manufacturer for the exact packaged width, depth, height and weight for the SKU being delivered.
Measure access in use.
No numeric operating, bystander, service, hose-bend, cable, or accessory clearance published in cited sources. Any optional room allowance is user-selected and is not a manufacturer minimum.
- The standard package lists the exhaust pipe, power adapter, and cables; the touchscreen controller and rotary attachment are optional. Confirm the exact live bundle.
- xTool markets F2 for portable personalization, while its Class 4 training says not to operate under Class 4 conditions with bystanders or children nearby, or in public places. Transport planning is separate from permission to operate.
- As of September 14, 2026, observed seller choices included Standalone, Air Purifier Go, Slide Extension, and Deluxe packages; contents, prices, and availability can change.
- Main-machine shipping dimensions and weight were not found in the cited first-party sources.
Commissions do not change fit results or profile ordering. The seller controls availability, pricing, attribution, returns and the transaction.
Check today's F2 15W diode + 5W IR price and bundle contents at xToolPlan the accessories that change the room.
Compatibility below comes from the cited manufacturer material. Every accessory still needs its own footprint, load, delivery and operating-path check.
Use the measurements in context.
Room dimensions answer only part of the purchase question. Check the task and material evidence, record the software handoff, then review the exact quote.
Compare named workbenches for this machine or download its full-size paper footprint. Both keep closed-body geometry separate from operating and support requirements.
F2 craft-fair booth planner
Screen the table and organize questions about Class 4 public use, the venue, air path, power, materials, supervision, and load-in.
F-series buyer guideCompare the exact F-series configurations
Separate laser systems, work areas, closed bodies, safety-class variants, and missing installation evidence.
Exhaust decisionAir purifier vs inline fan
Separate outdoor extraction from filtration and preserve the P3-specific accessory restrictions.
DeliveryDelivery-path calculator
Prefill sourced package evidence and test every rectangular opening in route order.
ProjectsProject-fit checker
Compare a measured flat project with documented work areas and optional 90-degree rotation.
Scale drawingWorkshop layout planner
Place the sourced closed body, support, entered operating zone, air-management equipment, and keep-clear rectangle.
CompareInstallation comparison builder
Put this evidence beside up to two other current profiles without hiding incomplete fields.
DependenciesxTool setup builder
Map intended uses to included items, compatible choices, required accessories, and confirmations.
PlacementOperating-footprint planner
Add documented lid, service and material allowances to the closed footprint.
ExhaustVent-route planner
Prefill the machine note, then map segments, bends, transitions, endpoint, and confirmations without guessing airflow.
UtilitiesElectrical pre-check
Inventory the machine and accessory nameplates for a qualified electrician.
Open dataInstallation geometry row
Compare delivery, closed, exhaust, electrical, and numeric-clearance evidence in the downloadable dataset.
Change recordSpecification tracker
Inspect the dated observation baseline and any later retained changes to manufacturer documentation.
TemplateWorkshop planning record
Lay out the support, operating zone, accessories, and electrical-load inventory together.
Publisher assetEmbed this True Footprint card
Copy an auto-updating iframe or dated HTML badge with evidence states, review date, and room-check backlink.
Complete planLaser-room setup checklist
Carry delivery, operating space, air path, utilities, materials, documentation, and professional confirmations into one record.
Official seller informationxTool buying options
Compare current configurations and seller policies after the room questions are visible. No discount is assumed.
Compare another room-planning envelope.
- xTool F1 Ultra — 10.75 × 14.69 × 19.37 in / 273 × 373 × 492 mm on the product page; the user guide lists 493 × 253 × 373 mm without axis labels
- xTool F2 Ultra Dual 60W MOPA + 40W diode — 11.57 × 16.88 × 20.51 in / 294 × 429 × 521 mm used for conservative display; the support guide lists 520 mm
- xTool M2 10W / 20W / 40W — 24.0 × 22.4 × 7.1 in / 610 × 569 × 180 mm
- Compare xTool F2, F1 Ultra, F2 Ultra Single, F2 Ultra Dual, and F2 Ultra UV
Manufacturer sources used for this profile
Source links are editorial evidence, not paid links. Open the current source and match it to the exact region, model, and configuration.
Common room-planning questions about F2 15W diode + 5W IR
What are the published xTool F2 dimensions?
The recorded closed-body envelope is 6.89 × 9.33 × 13.15 in / 175 × 237 × 334 mm. It does not include lid, service, duct, accessory, or material-travel clearance.
Are xTool F2 shipping dimensions published?
A verified general shipping envelope is not published in the cited sources. The current record says: Not published in cited sources. Ask for the exact shipped SKU and bundle.
How much room does xTool F2 need?
The closed body is only the starting envelope. No numeric operating, bystander, service, hose-bend, cable, or accessory clearance published in cited sources. Measure the lid, controls, access panels, exhaust, cables, accessories, material travel, egress, and service access in the actual arrangement.
What exhaust and electrical evidence is recorded for xTool F2?
Exhaust: 65 mm smoke-exhaust pipe; route, termination, and any purifier configuration require separate confirmation Electrical: Power-adapter input 100–120 VAC, 50/60 Hz; machine input 25 VDC, 6 A; 150 W maximum machine input These notes organize confirmation and do not approve a ventilation or electrical design.
Verify the exact machine and accessory nameplates, grounding, circuit and local requirements with a licensed electrician. Install exhaust exactly as the manufacturer directs and resolve discharge, filtration and material emissions under applicable rules. Never leave active processing unattended.