Free planning handoff · reviewed September 14, 2026

Plan an xTool F2 craft-fair workstation.

Screen the support, organize load-in and operating questions, and export a handoff. The tool deliberately separates xTool's portability marketing from permission to operate a Class 4 laser around the public.

Closed-body geometry
8 documented gates
Downloadable handoff
No account
No safety approval

01 · Interactive handoff

F2 closed-body screen + public-use handoff

Plan the booth without approving the operation.

Inputs stay in this browser

Support or table

Use unobstructed inches and a documented rated capacity. The calculation checks only the closed 6.89 × 9.33 in body and 10.14 lb machine—not controls, air equipment, materials, barriers, or operating zones.

Usable width · inUsable depth · inRated capacity · lb

Operating and load-in confirmations

Checking a box means it is documented for this exact event. It is not a self-approval.

Exact F2 model, package, accessories, safety class, and current instructions are recorded.The venue has answered in writing whether transport, demonstration, and operation of this exact equipment are permitted.A qualified laser-safety review addresses Class 4 operation, bystanders, children, reflections, barriers, access control, and the actual booth.xTool-supported outdoor exhaust or compatible filtration is documented, including discharge or filter placement and upkeep.Every simultaneous machine and accessory load is inventoried, and the venue or electrician has confirmed the supply arrangement.Every intended material and process is confirmed against current manufacturer guidance and venue restrictions.Continuous supervision, shutdown, fire response, incident handling, and responsibility for preventing unattended use are assigned.Load-in route, protective case or package, secure storage, lifting, packing, and end-of-event removal are documented.

LaserRoomReady organizes measurements and questions. It does not approve Class 4 operation, design barriers or exhaust, assess exposure, inspect electrical service, grant venue permission, certify materials, or replace xTool instructions and qualified review.

02 · Public-use boundary

Portable does not mean approved for public operation.

xTool publishes a 175 × 237 × 334 mm body and 4.60 kg machine weight, and markets F2 for portable personalization. It also identifies F2 as Class 4. Its safety training says Class 4 operation is not for conditions with bystanders, children, or public access. A booth layout cannot reconcile those facts by itself.

Treat “bring it” and “turn it on” as separate decisions.

The planner can organize transport and workstation evidence even when on-site processing is not permitted. Obtain the exact venue position, current xTool instructions, and qualified laser-safety review before promising live operation.

03 · Full booth envelope

The 6.89 × 9.33-inch body is only one rectangle.

Stable rated support with the closed machine fully supported
Exact user-confirmed operating and access zone
Touchscreen or computer, power adapter, cables, controls, and sample storage
65 mm exhaust pipe, supported outdoor route or compatible purifier, and service access
Operator position, customer and aisle boundaries, and any qualified-review control zone
Material staging, finished-product pickup, packaging, secure storage, and emergency access

Place the F2, support, air-management equipment, and user-confirmed zones on the scale SVG planner.

04 · Delivery and packing

The F2's shipping carton is still an open question.

The cited xTool pages publish the assembled body and machine weight, but not a universal F2 carton or shipping weight. Record the exact purchased package, case or repacking method, accessories, lifting method, vehicle placement, route, overnight storage, and removal plan. Do not substitute the 175 × 237 × 334 mm machine body for the protected transport envelope.

05 · Official evidence

xTool sources used for this planner

xTool F2 product pageBody, weight, adapter input, package options, Class 4 listing · checked 2026-09-14

xTool F2 user guideDimensions, work area, maximum height, machine input · checked 2026-09-14

xTool F2 FAQLaser configuration, standard and extended work areas · checked 2026-09-14

xTool Class 4 laser-safety trainingPublic/bystander operating boundary · checked 2026-09-14

xTool IF2 2.0 compatibility guide65 mm F2 exhaust interface · checked 2026-09-14