Launch evidence tracker · reviewed October 29, 2026
xTool X1 vs P2S vs P3: compare the space before buying.
The P2S has a published body depth of 639 mm; xTool gives two P3 depths, 780 or 808 mm. The X1 listing gives a 1,000 × 580 × 420 mm dimension set without labeling the axes, so confirm its orientation before comparing a doorway or bench.
Planning a holiday purchase? Check the machine against your room first →
- P2S: a starting point for comparing a smaller documented cabinet depth.
- P3: consider its larger documented cabinet and confirm the depth and electrical-input discrepancies.
- X1: compare its 55 W CO₂ and optional laser-module configuration while confirming installation dimensions.
- X1: U.S. listing available
- 5 X1 setup questions to confirm
- P3 conflict retained
- Seller terms may change
Only compare fields the manufacturer has actually published.
| Decision field | xTool X1 | xTool P2S 55W CO₂ | xTool P3 80W CO₂ |
|---|---|---|---|
| Market status | U.S. seller listing available; confirm current stock and delivery | Current seller listing | Current seller listing |
| Primary laser | 55 W CO₂ named in xTool's explainer | 55 W CO₂ | 80 W CO₂ |
| Assembled envelope | 1,000 × 580 × 420 mm; main unit 60 kg (seller listing) | 39.4 × 25.2 × 10.6 in / 1000 × 639 × 268 mm | 49.2 × (30.7 or 31.8) × 19.5 in / 1250 × (780 or 808) × 496 mm (official sources conflict on depth) |
| Shipping package | Confirm exact SKU package and handling | xTool's U.S. P2S education listing states 44.4 × 28.6 × 13.6 in / 1122 × 727 × 346 mm; confirm the exact bundle, axis order and freight dimensions before using them | 53.1 × 36.2 × 27.6 in / 1350 × 920 × 700 mm; 335.1 lb / 152 kg |
| Work area | 615 × 320 mm surface engraving; other processes differ | 23.6 × 12.0 in / 600 × 305 mm | 36.0 × 18.0 in / 915 × 458 mm |
| Room-evidence state | Body published; delivery and clearances require confirmation | Published body; package and numeric clearances unresolved | Official assembled-depth and maximum-input conflict |
xTool's current FAQ and manual disagree on part of the assembled envelope and maximum input. The paid seller link does not remove that conflict; verify the exact current unit and documentation before planning the room.
What xTool now publishes about X1.
U.S. listing available
xTool announced the X1 launch on October 29 and lists configurations for purchase. Stock, delivery timing, prices and bundle contents can change; confirm the seller's current terms.
1,000 × 580 × 420 mm · 60 kg
xTool lists these machine dimensions and the main-unit weight. They do not include verified delivery packaging, operating clearances, or accessory space.
615 × 320 mm
The seller lists this as the surface engraving area. Other processes and configurations have different limits; confirm the exact mode and module.
55 W CO₂; optional modules
xTool says the 20 W Diode Galvo Module is required to add optional 5 W UV, 60 W MOPA or 30 W fiber sources. Confirm your bundle and safety requirements.
The listed machine dimensions are not the full operating envelope. Confirm delivery width, lid travel, service access, exhaust routing, combined utility load, and accessory footprint before planning a room.
Five details can change a room or purchase decision.
- Exact unopened package dimensions, shipping weight, and delivery handling for the selected SKU
- Combined wall-side electrical load and circuit requirements for the selected machine and accessories
- Exhaust interface, included air-management equipment, and approved routing for the selected setup
- Numeric lid, service, material-travel, and accessory clearances
- Exact included components, source-pack dependencies, and configuration-specific safety classification
Choose the evidence that matters to your setup.
X1's multi-source concept matters to your workflow
The 20 W Diode Galvo Module is required for optional UV, MOPA or fiber sources. Confirm the selected bundle, package dimensions, operating clearances, combined electrical load and exhaust arrangements before ordering.
Check X1 configurations and price at xTool ↗ · Paid linkPaid xTool link · We may earn a commission at no extra cost to you.You need a current 55 W CO₂ path with a published body envelope
Use the P2S profile, request exact shipping-package evidence, calculate the full setup budget, and check the current seller configuration only after those limits are visible.
Review the P2S room profile →You need the current 80 W platform and published delivery package
P3 has useful package and work-area evidence, but the official assembled-depth and input conflict must be resolved for the exact unit. Seller availability is not a room approval.
Review the P3 conflict record →The sticker price is not your setup total
Enter the live machine or bundle price, air-management equipment, attachments, support, site preparation, shipping, tax, and starter materials in one worksheet.
Open the xTool setup-cost builder →A launch tracker should show what changed.
Added the product listing's machine dimensions, main-unit weight, surface engraving area and current U.S. availability. Packaging, clearances and setup requirements still need confirmation.
September 25, 2026 · Architecture clarificationAdded the engineering explanation and retained the original September 14 pre-launch evidence baseline.
First-party evidence used for this tracker
Questions to ask before ordering
Can I compare xTool X1 room dimensions with P2S or P3 yet?
As of October 29, 2026, xTool lists X1 machine dimensions of 1,000 × 580 × 420 mm and a 60 kg main-unit weight. That is a body comparison, not a complete room or delivery fit: confirm packaging, clearances, exhaust and utility requirements for the selected setup.
Can I buy the X1?
xTool announced the U.S. launch on October 29, 2026 and lists X1 configurations. Prices, stock, bundle contents and shipping estimates can change; confirm current regional terms at the seller.
What has xTool confirmed about X1?
xTool lists a 55 W CO₂ source and a 615 × 320 mm surface engraving area. Its 20 W Diode Galvo Module is required to add optional UV, MOPA or fiber sources. Other processes and configurations have different limits.
Does a P2S or P3 paid link mean LaserRoomReady recommends buying now?
No. The links only open current seller listings for research. The P3 official-source conflict remains visible, and neither link certifies a room, setup, material, ventilation path, electrical service, or purchase decision.
Price the complete current setup, not only the machine.
Use live seller prices and your own site costs; blanks remain visible instead of becoming reassuring zeros.