Cabinet laser profile
xTool P3 80W CO₂
A manufacturer-source record for room and delivery planning. It does not certify the room, circuit, ventilation, material or fire-safety setup.
- Official sources conflict
- Checked
- No inferred package or clearance values
The cited official sources disagree. Confirm the exact delivered model, current manual and nameplate before entering a planning dimension or input rating.
The published machine envelope
49.2 × 30.7 or 31.8 × 19.5 in (official sources conflict)
Official values conflict; numeric fit checking is disabled.
231.5 lb / 105 kg
Verify the complete operating load and supporting surface separately.
36.0 × 18.0 in / 915 × 458 mm
Processing area is not the required room footprint.
Not published in cited sources
Do not substitute assembled dimensions for the unopened package.
Requirements to carry into the site plan
Route and connection
80 mm machine-side connection in xTool compatibility documents; IF2 2.0 included
Nameplate input
100–240 VAC, 50/60 Hz; official maximum-input figures conflict (1400W vs 1700W)
Cooling components
Built-in cooling; verify current manual and nameplate
Access in use
No numeric lid or service clearance published in cited sources.
Open checks remain part of the answer.
Get the shipping dimensions.
Not published in cited sources. Ask the seller or manufacturer for the exact packaged width, depth, height and weight for the SKU being delivered.
Measure access in use.
No numeric lid or service clearance published in cited sources. Any optional room allowance is user-selected and is not a manufacturer minimum.
Resolve the published disagreement.
49.2 × 30.7 or 31.8 × 19.5 in (official sources conflict). Do not silently choose one value.
- Verify the exact depth and input rating on the delivered model/nameplate before using them for a pass.
Verify the exact machine and accessory nameplates, grounding, circuit and local requirements with a licensed electrician. Install exhaust exactly as the manufacturer directs and resolve discharge, filtration and material emissions under applicable rules. Never leave active processing unattended.