Desktop laser profile
xTool P2S 55W CO₂
A record based on manufacturer sources for room and delivery planning. It does not certify the room, circuit, ventilation, material, or fire-safety setup.
Direct answer: the recorded closed body is 39.4 × 25.2 × 10.6 in / 1000 × 639 × 268 mm; the unopened package is not fully published for a general current shipment. Operating clearance remains a separate check.
- Published envelope recorded
- Profile reviewed
- No inferred package or clearance values
The published machine envelope
39.4 × 25.2 × 10.6 in / 1000 × 639 × 268 mm
Manufacturer-published assembled envelope.
99.2 lb / 45 kg
Verify the complete operating load and supporting surface separately.
23.6 × 12.0 in / 600 × 305 mm
Processing area is not the required room footprint.
44.2 × 28.6 × 13.6 in appears in official education and refurbished listings that mix P2/P2S copy; confirm the exact current SKU
Published shipping weight: Not published in cited sources. Confirm the exact bundle before delivery.
Requirements to carry into the site plan
Route and connection
Exhaust pipe supplied; exact port diameter not published in cited sources
Nameplate input
100–120 VAC; maximum 700 W; region and frequency should be verified
Cooling components
Coolant service requires rear-cover access
Access in use
No numeric lid or service clearance published in cited sources.
Open checks remain part of the answer.
Get the shipping dimensions.
44.2 × 28.6 × 13.6 in appears in official education and refurbished listings that mix P2/P2S copy; confirm the exact current SKU. Ask the seller or manufacturer for the exact packaged width, depth, height and weight for the SKU being delivered.
Measure access in use.
No numeric lid or service clearance published in cited sources. Any optional room allowance is user-selected and is not a manufacturer minimum.
- Keep rear coolant-service access available.
- The package evidence remains partial and listing-specific, so it is not used as a verified universal P2S package.
Commissions do not change fit results or profile ordering. The seller controls availability, pricing, attribution, returns and the transaction.
Check today's P2S 55W CO₂ price and bundle contents at xToolPlan the accessories that change the room.
Compatibility below comes from the cited manufacturer material. Every accessory still needs its own footprint, load, delivery and operating-path check.
SafetyPro IF2 2.0 Inline Duct Fan
A powered inline exhaust component with a published 3-inch duct and 2.3 m flexible duct.
Open sourced profile →filtrationSafetyPro AP2 Air Purifier
A floor or low-shelf filtration unit with published 150 m³/h airflow and four airflow levels.
Open sourced profile →filtrationSafetyPro AP2 Max Air Purifier
A large floor filtration system with published 700 m³/h airflow and 1–100% airflow control.
Open sourced profile →supportP2 / P2S Riser Base
A model-specific support accessory required for P2/P2S conveyor use and thicker-object configurations.
Open sourced profile →Use the measurements in context.
Room dimensions answer only part of the purchase question. Check the task and material evidence, record the software handoff, then review the exact quote.
Check the work area of the exact module and bundle: seven documented configurations and three design-size examples. A machine-body dimension is not its processing area.
Compare named workbenches for this machine or download its full-size paper footprint. Both keep closed-body geometry separate from operating and support requirements.
P2S complete setup requirements
Put the table, machine input, exhaust route, filtration choices and accessories into one system plan.
Room and workflowF2 Ultra vs P2S
Compare the tall compact galvo platform with the wide desktop CO₂ cabinet.
Exhaust decisionAir purifier vs inline fan
Separate outdoor extraction from filtration and preserve the P3-specific accessory restrictions.
DeliveryDelivery-path calculator
Prefill sourced package evidence and test every rectangular opening in route order.
ProjectsProject-fit checker
Compare a measured flat project with documented work areas and optional 90-degree rotation.
Scale drawingWorkshop layout planner
Place the sourced closed body, support, entered operating zone, air-management equipment, and keep-clear rectangle.
CompareInstallation comparison builder
Put this evidence beside up to two other current profiles without hiding incomplete fields.
DependenciesxTool setup builder
Map intended uses to included items, compatible choices, required accessories, and confirmations.
RotaryRotary-object fit wizard
Screen a measured diameter and retain length, taper, handle, clamping, and riser questions.
PlacementOperating-footprint planner
Add documented lid, service and material allowances to the closed footprint.
ExhaustVent-route planner
Prefill the machine note, then map segments, bends, transitions, endpoint, and confirmations without guessing airflow.
UtilitiesElectrical pre-check
Inventory the machine and accessory nameplates for a qualified electrician.
Open dataInstallation geometry row
Compare delivery, closed, exhaust, electrical, and numeric-clearance evidence in the downloadable dataset.
Change recordSpecification tracker
Inspect the dated observation baseline and any later retained changes to manufacturer documentation.
TemplateWorkshop planning record
Lay out the support, operating zone, accessories, and electrical-load inventory together.
Publisher assetEmbed this True Footprint card
Copy an auto-updating iframe or dated HTML badge with evidence states, review date, and room-check backlink.
Complete planLaser-room setup checklist
Carry delivery, operating space, air path, utilities, materials, documentation, and professional confirmations into one record.
Official seller informationxTool buying options
Compare current configurations and seller policies after the room questions are visible. No discount is assumed.
Compare another room-planning envelope.
Manufacturer sources used for this profile
Source links are editorial evidence, not paid links. Open the current source and match it to the exact region, model, and configuration.
Common room-planning questions about P2S 55W CO₂
What are the published xTool P2S 55W CO₂ dimensions?
The recorded closed-body envelope is 39.4 × 25.2 × 10.6 in / 1000 × 639 × 268 mm. It does not include lid, service, duct, accessory, or material-travel clearance.
Are xTool P2S 55W CO₂ shipping dimensions published?
A verified general shipping envelope is not published in the cited sources. The current record says: 44.2 × 28.6 × 13.6 in appears in official education and refurbished listings that mix P2/P2S copy; confirm the exact current SKU. Ask for the exact shipped SKU and bundle.
How much room does xTool P2S 55W CO₂ need?
The closed body is only the starting envelope. No numeric lid or service clearance published in cited sources. Measure the lid, controls, access panels, exhaust, cables, accessories, material travel, egress, and service access in the actual arrangement.
What exhaust and electrical evidence is recorded for xTool P2S 55W CO₂?
Exhaust: Exhaust pipe supplied; exact port diameter not published in cited sources Electrical: 100–120 VAC; maximum 700 W; region and frequency should be verified These notes organize confirmation and do not approve a ventilation or electrical design.
Verify the exact machine and accessory nameplates, grounding, circuit and local requirements with a licensed electrician. Install exhaust exactly as the manufacturer directs and resolve discharge, filtration and material emissions under applicable rules. Never leave active processing unattended.