Skip to main content

Software compatibility · source-linked

Does your xTool work with LightBurn?

The answer depends on the exact model, software version, firmware and features you need. Start with the device table, then confirm your workflow with LightBurn before you buy or update anything.

By LaserRoomReadyPublished-source guide · No hands-on testing

Independent research, not a compatibility guarantee or installation approval. LaserRoomReady may earn a commission from labeled xTool purchase links elsewhere on this site. Affiliate and safety disclosures.

Check the exact model first.

This snapshot reflects LightBurn’s 2.2 xTool device table, which itself says its support list is current as of October 6, 2026. We reviewed that source on October 29. A listed device can still have feature, connection or firmware limitations. Recheck the current LightBurn device guide for changes.

Selected xTool models in LightBurn’s documented support list. Scroll horizontally on narrow screens.
Exact modelLightBurn 2.2 tableWhat to check
xTool P2SSupportedLightBurn lists P2S as supported; its documentation notes camera limitations on newer firmware.
xTool S1SupportedLightBurn lists S1 as supported and documents a USB connection option.
xTool F1 UltraSupportedListed as supported; follow the firmware guidance for the exact Class 1 or Class 4 version.
xTool F2Needs further testingLightBurn says it should be functional but needs further testing.
xTool F2 UltraNeeds further testingListed with LightBurn’s further-testing qualification.
xTool F2 Ultra SingleNeeds further testingListed separately with the further-testing qualification.
xTool F2 Ultra UVNeeds further testingListed separately with the further-testing qualification.
xTool P3Not supported in the tableLightBurn’s reviewed device table lists P3 as unsupported.
xTool M2Not supported in the tableLightBurn’s reviewed device table lists M2 as unsupported.
xTool X1Not listedX1 is not in the reviewed table. Absence from the list does not establish compatibility or incompatibility.

“Needs further testing” is LightBurn’s qualification, not proof that every job or feature will work. The X1 launched after the table’s stated October 6 date; its absence here is not a verdict. Check the live vendor documentation and ask about the exact configuration.

Select a model name in the table to review its room requirements and source evidence. Once you have a shortlist, compare current xTool buying options. That page includes labeled paid links; we may earn a commission at no extra cost to you.

Support for a machine is not support for every feature.

  • Built-in cameras: LightBurn’s reviewed guide says xTool built-in cameras are not yet supported in LightBurn. Do not assume camera positioning will transfer from xTool Studio.
  • Multiple laser sources: LightBurn 2.2 documents source selection for supported dual-source models such as F1 and F2, including switching sources within a job. Confirm the precise machine, source and operation you need.
  • Galvo functions: its guide says 3D sliced engraving and split marking are not currently available for xTool lasers. Check the source again before relying on those workflows.
  • Version and firmware: the new xTool device type may require newer machine firmware. LightBurn publishes model-specific guidance; verify compatibility, backup and rollback implications with the vendors before changing firmware.

LightBurn labels the new xTool device type a Labs feature. Software support does not establish material suitability, safe operation, ventilation, electrical readiness or room fit.

Before buying, updating or switching software

  1. Write down the exact xTool model, laser source and accessories, together with your intended job and features.
  2. Read LightBurn’s current model list, release notes and setup instructions. Confirm your computer, LightBurn license and required connection with the vendor.
  3. Ask whether your essential workflow—such as camera alignment, source switching or a galvo operation—is supported on that exact configuration.
  4. Check the manufacturer’s firmware instructions and the consequences of an update before changing the machine. Keep a record of the version you started with.
  5. Independently check the machine’s room footprint, utilities and air-management plan. Software compatibility is only one part of the decision.

Open the software preflight worksheet to record unanswered questions, or compare installation evidence for the machines on your shortlist.

Sources and limits

The model statuses and feature limitations above summarize LightBurn’s xTool device guide for version 2.2, reviewed October 29, 2026. Its support table is dated October 6; its firmware section says October 16. LightBurn also publishes version 2.2 feature notes. Vendor documentation can change after our review.

We have not tested these machines, firmware combinations or software features. This page does not replace either vendor’s instructions. Send a correction with the exact model and source.

More buying guides · Browse machine room profiles · Compare the xTool F series