Skip to main content
LaserRoomReady
Menu
Check my space

Room-first comparison tool

Which supported laser fits the space you already have?

Start with two workbench measurements, then add the project size you need to make. Compare documented geometry—not commission or price. Room and delivery details are optional follow-up checks.

  • No account
  • Measurements remain in this browser
  • Unknowns stay visible

Shopping for a support? Compare exact workbench models or print a full-size machine outline.

Reverse room-fit finder

Start with the space—not a shopping list.

Local calculation

Not sure which laser source suits the job? Start with the material and intended process. This finder screens room geometry, not processing capability.

1Your usable supporting surface

Required. Measure the clear, supported top—not the furniture's nominal size.

Can the machine rotate 90° while controls, loading, exhaust and service access remain practical?
2What size project must fit?

Optional. Enter the full flat design rectangle, not the machine size. This excludes base work areas that are too small; material suitability and accessory feed paths need separate checks.

Uses P2S standard slats, S1 40W, and M2 10W/20W—not every module or bundle. For M2 40W, honeycomb options, or metric measurements, use the configuration-aware project-size checker.

3 · Add the usable room zone Recommended

Use clear space after shelves, doors and fixed equipment are excluded.

4 · Add one delivery opening Optional

Package data is separate from machine size. Missing manufacturer data stays unresolved.

May the unopened package rest on another face under current manufacturer or freight instructions?

Enter usable surface width and depth to compare profiles.

The finder screens published geometry and weight only. It does not recommend performance, approve a support, model diagonal moves, or determine ventilation, electrical, fire-safety or code suitability.

ROOM-FIRST SHORTLIST

One measured surface.
Every supported profile.

Results are ordered by evidence state and physical footprint—not commission or price.

  • Closed body fit
  • Published weight
  • Room-zone geometry
  • Unopened delivery evidence
A shortlist is not an installation approval.

Run the complete room check for the selected machine, verify every current manufacturer source and send electrical, ventilation, fire-safety, structural and code questions to the appropriate qualified person.

Comparing xTool portable engravers? Use the F-series room guide and the dedicated F2 craft-fair workstation planner. Before checkout, add the setup-cost builder and xTool buying options.