Free · mode-specific · conservative
Does this object fit the documented rotary range?
Check the diameter against a retained roller, chuck, sphere, or ring range—then keep every other potential failure point visible beside the result.
- RA3 + RA2 Pro
- mm + inches
- riser dependencies
- no account
Screen the object before buying the rotary.
Diameter is checked only where a reusable manufacturer range is published. Every physical setup still requires an exact variant and clearance review.
Enter an object diameter
The wizard needs a positive measured diameter and an exact machine selection.
Still unresolved: length capacity and end clearance (recorded, not numerically evaluated), taper and grip method, handle sweep and collision clearance, exact attachment variant.
Boundary: This tool screens a measured diameter against selected published ranges. It does not establish clamping, collision avoidance, length capacity, taper handling, mass balance, focus, settings, material suitability, enclosure/classification, ventilation, fire protection, or safe operation.
Length, taper, handles, mass, and focus still matter.
The numeric result evaluates only a reviewed diameter range for the exact mode. It cannot infer stable clamping, uninterrupted travel, lid closure, usable engraving area, focus, material suitability, or processing settings.
Roller, chuck, sphere, and ring are different setups.
Jaw type, rotary generation, machine compatibility, and riser level can change the usable range. Confirm the exact accessory name and current instructions; do not transfer a range from another mode.
Document the supporting configuration.
Build the complete list in the xTool setup builder, then place the machine and accessories in the scale workshop planner.
Reserve the rotary operating space.
A diameter match does not account for the riser, lid, cable, handles, or accessory travel.