Desktop laser profile
xTool M2 10W / 20W / 40W
A record based on manufacturer sources for room and delivery planning. It does not certify the room, circuit, ventilation, material, or fire-safety setup.
Direct answer: the recorded closed body is 24.0 × 22.4 × 7.1 in / 610 × 569 × 180 mm; the unopened package is 27.6 × 24.8 × 11.2 in / 700 × 630 × 285 mm. Operating clearance remains a separate check.
- Published envelope recorded
- Profile reviewed
- No inferred package or clearance values
The published machine envelope
24.0 × 22.4 × 7.1 in / 610 × 569 × 180 mm
Manufacturer-published assembled envelope.
27.1 lb / 12.3 kg (basic kit)
Verify the complete operating load and supporting surface separately.
16.8 × 12.6 in / 426 × 320 mm for 10 W/20 W; 16.8 × 12.3 in / 426 × 312 mm for 40 W
Processing area is not the required room footprint.
27.6 × 24.8 × 11.2 in / 700 × 630 × 285 mm
Published shipping weight: 35.1 lb / 15.9 kg (basic kit). Confirm the exact bundle before delivery.
Requirements to carry into the site plan
Route and connection
65 mm smoke-exhaust pipe; compatible filtration depends on the exact xTool configuration. Route limits are not published in the cited FAQ.
Nameplate input
Power-adapter output is 25 V at 4.8 A for 10 W, 25 V at 6 A for 20 W, and 25 V at 8 A for 40 W; verify the wall-side adapter input and every accessory nameplate
Cooling components
No external water-cooling system is stated in the cited FAQ; verify the selected module and operating environment
Access in use
No numeric lid, service or material-loading clearance is published in cited sources.
Open checks remain part of the answer.
Confirm the exact shipped bundle.
27.6 × 24.8 × 11.2 in / 700 × 630 × 285 mm. The cited size is a useful starting point, but seller packaging and bundled accessories can change the delivery envelope.
Measure access in use.
No numeric lid, service or material-loading clearance is published in cited sources. Any optional room allowance is user-selected and is not a manufacturer minimum.
- The current user guide and FAQ specification table include a 40 W module, while the FAQ's supported-module list and processing table still name only 10 W/20 W. Confirm the exact 40 W configuration with xTool before ordering.
- Accessory bundles can change the delivery package and utility plan.
- xTool states that M2 does not support the riser base or conveyor feeder.
Commissions do not change fit results or profile ordering. The seller controls availability, pricing, attribution, returns and the transaction.
Check today's M2 10W / 20W / 40W price and bundle contents at xToolPlan the accessories that change the room.
Compatibility below comes from the cited manufacturer material. Every accessory still needs its own footprint, load, delivery and operating-path check.
SafetyPro IF2 2.0 Inline Duct Fan
A powered inline exhaust component with a published 3-inch duct and 2.3 m flexible duct.
Open sourced profile →filtrationSafetyPro AP2 Air Purifier
A floor or low-shelf filtration unit with published 150 m³/h airflow and four airflow levels.
Open sourced profile →filtrationSafetyPro AP2 Max Air Purifier
A large floor filtration system with published 700 m³/h airflow and 1–100% airflow control.
Open sourced profile →filtrationDesktop Air Purifier
A compact purifier option for selected desktop machines; M2 requires the specified adapter.
Open sourced profile →Use the measurements in context.
Room dimensions answer only part of the purchase question. Check the task and material evidence, record the software handoff, then review the exact quote.
Check the work area of the exact module and bundle: seven documented configurations and three design-size examples. A machine-body dimension is not its processing area.
Compare named workbenches for this machine or download its full-size paper footprint. Both keep closed-body geometry separate from operating and support requirements.
M2 10W vs 20W vs 40W
Compare published work area and DC input evidence while keeping the documentation difference visible.
Exhaust decisionAir purifier vs inline fan
Separate outdoor extraction from filtration and preserve the P3-specific accessory restrictions.
DeliveryDelivery-path calculator
Prefill sourced package evidence and test every rectangular opening in route order.
ProjectsProject-fit checker
Compare a measured flat project with documented work areas and optional 90-degree rotation.
Scale drawingWorkshop layout planner
Place the sourced closed body, support, entered operating zone, air-management equipment, and keep-clear rectangle.
CompareInstallation comparison builder
Put this evidence beside up to two other current profiles without hiding incomplete fields.
DependenciesxTool setup builder
Map intended uses to included items, compatible choices, required accessories, and confirmations.
RotaryRotary-object fit wizard
Screen a measured diameter and retain length, taper, handle, clamping, and riser questions.
PlacementOperating-footprint planner
Add documented lid, service and material allowances to the closed footprint.
ExhaustVent-route planner
Prefill the machine note, then map segments, bends, transitions, endpoint, and confirmations without guessing airflow.
UtilitiesElectrical pre-check
Inventory the machine and accessory nameplates for a qualified electrician.
Open dataInstallation geometry row
Compare delivery, closed, exhaust, electrical, and numeric-clearance evidence in the downloadable dataset.
Change recordSpecification tracker
Inspect the dated observation baseline and any later retained changes to manufacturer documentation.
TemplateWorkshop planning record
Lay out the support, operating zone, accessories, and electrical-load inventory together.
Publisher assetEmbed this True Footprint card
Copy an auto-updating iframe or dated HTML badge with evidence states, review date, and room-check backlink.
Complete planLaser-room setup checklist
Carry delivery, operating space, air path, utilities, materials, documentation, and professional confirmations into one record.
Official seller informationxTool buying options
Compare current configurations and seller policies after the room questions are visible. No discount is assumed.
Compare another room-planning envelope.
Manufacturer sources used for this profile
Source links are editorial evidence, not paid links. Open the current source and match it to the exact region, model, and configuration.
Common room-planning questions about M2 10W / 20W / 40W
What are the published xTool M2 10W / 20W / 40W dimensions?
The recorded closed-body envelope is 24.0 × 22.4 × 7.1 in / 610 × 569 × 180 mm. It does not include lid, service, duct, accessory, or material-travel clearance.
Are xTool M2 10W / 20W / 40W shipping dimensions published?
The recorded package is 27.6 × 24.8 × 11.2 in / 700 × 630 × 285 mm. Confirm the exact bundle and freight instructions before delivery.
How much room does xTool M2 10W / 20W / 40W need?
The closed body is only the starting envelope. No numeric lid, service or material-loading clearance is published in cited sources. Measure the lid, controls, access panels, exhaust, cables, accessories, material travel, egress, and service access in the actual arrangement.
What exhaust and electrical evidence is recorded for xTool M2 10W / 20W / 40W?
Exhaust: 65 mm smoke-exhaust pipe; compatible filtration depends on the exact xTool configuration. Route limits are not published in the cited FAQ. Electrical: Power-adapter output is 25 V at 4.8 A for 10 W, 25 V at 6 A for 20 W, and 25 V at 8 A for 40 W; verify the wall-side adapter input and every accessory nameplate These notes organize confirmation and do not approve a ventilation or electrical design.
Verify the exact machine and accessory nameplates, grounding, circuit and local requirements with a licensed electrician. Install exhaust exactly as the manufacturer directs and resolve discharge, filtration and material emissions under applicable rules. Never leave active processing unattended.