Cabinet laser profile
OMTech Maker MF2028-100
A manufacturer-source record for room and delivery planning. It does not certify the room, circuit, ventilation, material or fire-safety setup.
- Published envelope recorded
- Checked
- No inferred package or clearance values
The published machine envelope
65.0 × 34.3 × 36.6 in
Manufacturer-published assembled envelope.
251.3 lb / 114 kg
Verify the complete operating load and supporting surface separately.
20 × 28 in / 500 × 700 mm
Processing area is not the required room footprint.
Not published in cited sources
Do not substitute assembled dimensions for the unopened package.
Requirements to carry into the site plan
Route and connection
Fan, pipe and clamp supplied; diameter not published in cited sources
Nameplate input
Standard U.S. model 110 VAC, 60 Hz; FAQ says roughly 900W
Cooling components
Plan external chiller and its placement/load separately
Access in use
No numeric lid/service clearance; external chiller, ducting and access need separate space.
Open checks remain part of the answer.
Get the shipping dimensions.
Not published in cited sources. Ask the seller or manufacturer for the exact packaged width, depth, height and weight for the SKU being delivered.
Measure access in use.
No numeric lid/service clearance; external chiller, ducting and access need separate space. Any optional room allowance is user-selected and is not a manufacturer minimum.
- The 900W figure is approximate—not an exact nameplate rating.
Verify the exact machine and accessory nameplates, grounding, circuit and local requirements with a licensed electrician. Install exhaust exactly as the manufacturer directs and resolve discharge, filtration and material emissions under applicable rules. Never leave active processing unattended.