Skip to main content

Desktop laser profile

xTool X1 55W CO₂

A record based on manufacturer sources for room and delivery planning. It does not certify the room, circuit, ventilation, material, or fire-safety setup.

Direct answer: the recorded closed body is 1,000 × 580 × 420 mm / 39.37 × 22.83 × 16.54 in; axis labels require confirmation. Package evidence: Package dimensions not established in cited sources; confirm the exact configuration. Operating clearance remains a separate check.

Planning a holiday purchase? Check this machine against your room first →

  • Published envelope recorded
  • Profile reviewed
  • No inferred package or clearance values
01 · Physical profile

The published machine envelope

Assembled size

1,000 × 580 × 420 mm / 39.37 × 22.83 × 16.54 in; axis labels require confirmation

Manufacturer-published assembled envelope.

Machine weight

132.28 lb / 60 kg main unit; excludes additional modules and accessories

Verify the complete operating load and supporting surface separately.

Work area

Surface engraving: 615 × 320 mm / 24.21 × 12.60 in

Processing area is not the required room footprint.

Delivery package · unresolved

Package dimensions not established in cited sources; confirm the exact configuration

Published shipping weight: Shipping weight not established in cited sources. Confirm the exact bundle before delivery.

Laser configuration

55 W CO₂ base; optional laser modules are configuration-dependent

Use current manufacturer guidance for the exact material and process.

02 · Installation profile

Requirements to carry into the site plan

Exhaust

Route and connection

Confirm the exhaust connection, equipment and route for the exact configuration

Electrical

Nameplate input

Confirm the combined wall-side load and circuit requirements for the selected sources and accessories

Cooling

Cooling components

Confirm the cooling requirements for the exact configuration

Clearance

Access in use

Confirm lid travel, module projections, access and service clearances with xTool for the selected configuration.

03 · Resolve before ordering

Open checks remain part of the answer.

Package envelope

Get the shipping dimensions.

Package dimensions not established in cited sources; confirm the exact configuration. Ask the seller or manufacturer for the exact packaged width, depth, height and weight for the SKU being delivered.

Operating envelope

Measure access in use.

Confirm lid travel, module projections, access and service clearances with xTool for the selected configuration. Any optional room allowance is user-selected and is not a manufacturer minimum.

  • The cited xTool listing presents the three machine dimensions without labeling width, depth and height. Confirm each axis before relying on a fit calculation.
  • The 60 kg figure is for the main unit; include the weight and space of any additional modules and accessories.
  • Confirm shipping dimensions, combined electrical load, exhaust requirements and numeric clearances for the exact bundle before purchase or delivery.
Paid link: LaserRoomReady may earn a commission at no extra cost to you if you buy through this link.

Commissions do not change fit results or profile ordering. The seller controls availability, pricing, attribution, returns and the transaction.

Check today's X1 55W CO₂ price and bundle contents at xTool · Paid link
05 · Continue the plan

Use the measurements in context.

Room dimensions answer only part of the purchase question. Check the task and material evidence, review LightBurn compatibility, record the software handoff, then review the exact quote.

Exhaust decision

Air purifier vs inline fan

Separate outdoor extraction from filtration and preserve the P3-specific accessory restrictions.

Delivery

Delivery-path calculator

Prefill sourced package evidence and test every rectangular opening in route order.

Projects

Project-fit checker

Compare a measured flat project with documented work areas and optional 90-degree rotation.

Scale drawing

Workshop layout planner

Place the sourced closed body, support, entered operating zone, air-management equipment, and keep-clear rectangle.

Compare

Installation comparison builder

Put this evidence beside up to two other current profiles without hiding incomplete fields.

Placement

Operating-footprint planner

Add documented lid, service and material allowances to the closed footprint.

Exhaust

Vent-route planner

Prefill the machine note, then map segments, bends, transitions, endpoint, and confirmations without guessing airflow.

Utilities

Electrical pre-check

Inventory the machine and accessory nameplates for a qualified electrician.

Open data

Installation geometry row

Compare delivery, closed, exhaust, electrical, and numeric-clearance evidence in the downloadable dataset.

Change record

Specification tracker

Inspect the dated observation baseline and any later retained changes to manufacturer documentation.

Template

Workshop planning record

Lay out the support, operating zone, accessories, and electrical-load inventory together.

Publisher asset

Embed this True Footprint card

Copy an auto-updating iframe or dated HTML badge with evidence states, review date, and room-check backlink.

Complete plan

Laser-room setup checklist

Carry delivery, operating space, air path, utilities, materials, documentation, and professional confirmations into one record.

Official seller information

xTool buying options

Compare current configurations and seller policies after the room questions are visible. No discount is assumed.

06 · Related profiles
07 · Official evidence

Manufacturer sources used for this profile

Source links are editorial evidence, not paid links. Open the current source and match it to the exact region, model, and configuration.

08 · Plain-language answers

Common room-planning questions about X1 55W CO₂

What are the published xTool X1 dimensions?

The recorded closed-body envelope is 1,000 × 580 × 420 mm / 39.37 × 22.83 × 16.54 in; axis labels require confirmation. It does not include lid, service, duct, accessory, or material-travel clearance.

Are xTool X1 shipping dimensions published?

A verified general shipping envelope is not published in the cited sources. The current record says: Package dimensions not established in cited sources; confirm the exact configuration. Ask for the exact shipped SKU and bundle.

How much room does xTool X1 need?

The closed body is only the starting envelope. Confirm lid travel, module projections, access and service clearances with xTool for the selected configuration. Measure the lid, controls, access panels, exhaust, cables, accessories, material travel, egress, and service access in the actual arrangement.

What exhaust and electrical evidence is recorded for xTool X1?

Exhaust: Confirm the exhaust connection, equipment and route for the exact configuration Electrical: Confirm the combined wall-side load and circuit requirements for the selected sources and accessories These notes organize confirmation and do not approve a ventilation or electrical design.

Use the profile to organize professional checks—not replace them.

Verify the exact machine and accessory nameplates, grounding, circuit and local requirements with a licensed electrician. Install exhaust exactly as the manufacturer directs and resolve discharge, filtration and material emissions under applicable rules. Never leave active processing unattended.

Compare xTool X1 55W CO₂ with your delivery path and workspace.

Use the manufacturer profile as a starting point, then enter the room and route you actually measured.

Check my room for X1 55W CO₂