Compare named workbenches with a machine’s closed-body dimensions. Find a dimensional candidate, inspect the limitations, then print its full-size outline.
704.943.00
33.5 × 15.75 in · published product dimensions.
This compares a front-facing machine rectangle with published furniture dimensions. Usable support area, feet and operating space are not verified.
Workbench specifications ↗
Furniture checked 2026-09-16
The whole closed-body rectangle does not fit inside this published furniture rectangle. Do not assume overhang or a smaller foot pattern makes it acceptable; obtain exact support requirements.
Published machine weight: 44.1 lb / 20 kg. Furniture rating: Top panel: 132 lb; each drawer: 33 lb (separate limits).
IKEA requires secure anchoring. Drawer travel and handle projection need additional space. Do not substitute rounded dimensions from older buying guides. No comparison of these weight figures establishes structural suitability.
Machine dimension source ↗ · checked 2026-09-16. Weight sources and all machine evidence.
Front-facing closed body only. “Within” never means installation-ready. Keep the exact SKU and support configuration.
| Workbench | Published width × depth | Rectangle screen |
|---|---|---|
| IKEA BROR workbench303.332.86 | 43.25 × 21.625 in | Exceeds published rectangle11.7 mm depth shortfall |
| IKEA BROR workbench with drawers704.943.00 | 33.5 × 15.75 in | Exceeds published rectangle161.0 mm depth shortfall |
| Husky 52-inch adjustable workbenchHOLT52XDB12 | 52 × 24 in | Within · verify usable support48.6 mm total depth spare |
| Seville UltraHD 48-inch adjustable workbenchUHD20288B · Granite | 48 × 24 in | Within · verify usable support48.6 mm total depth spare |
| Seville UltraHD 72-inch adjustable workbenchUHD20292B · Granite | 72 × 25 in | Within · verify usable support74.0 mm total depth spare |
| Gladiator 4-foot adjustable hardwood workbenchGAWB04HWEG · Hammered Granite | 48 × 25 in | Within · verify usable support74.0 mm total depth spare |
| Gladiator 6-foot adjustable hardwood workbenchGAWB06HWEG · Hammered Granite | 72 × 25 in | Within · verify usable support74.0 mm total depth spare |
| ULINE 72 × 30-inch industrial packing tableH-1137-SS · Stainless steel top | 72 × 30 in | Within · verify usable support201.0 mm total depth spare |
The 303.332.86 BROR measures 43.25 × 21.625 inches in IKEA’s listing. Its published depth converts to 549.275 mm, which is 89.725 mm less than the P2S’s 639 mm closed-body depth. The body rectangle therefore exceeds the listed furniture rectangle. This does not establish whether feet could be supported; no overhang approval is implied.
25 inches is 635 mm: 4 mm less than the 639 mm body depth. A wider tabletop does not fix this front-facing depth shortfall. The listed 30-inch-deep ULINE top leaves 123 mm total nominal depth spare, but foot support, load distribution and operating clearances still require confirmation.
24 inches is 609.6 mm, exceeding the S1’s 561 mm body depth and M2’s 569 mm body depth. Both axes must fit; the M2 is 610 mm wide, so a 24 × 24-inch top is not a full-body dimensional match. Use the exact model comparison above.
U.S. listings checked 2026-09-16. This is a deliberately small directory, not a hands-on test or a list of approved laser stands. No furniture pricing, availability or structural suitability is asserted.
43.25 × 21.625 in · published product dimensions. Height: 34.625 in.
Published load statement: 132 lb maximum; top-versus-unit scope and distribution not specified.
Other BROR shelf ratings do not apply to this workbench. Clear top area and equipment-foot support require confirmation.
Read the first-party listing ↗33.5 × 15.75 in · published product dimensions. Height: 35 in.
Published load statement: Top panel: 132 lb; each drawer: 33 lb (separate limits).
IKEA requires secure anchoring. Drawer travel and handle projection need additional space. Do not substitute rounded dimensions from older buying guides.
Read the first-party listing ↗52 × 24 in · published product dimensions. Height: 26–39 in on feet; 29–42 in on included casters.
Published load statement: 300 lb maximum capacity; distribution not specified.
Confirm the support configuration and stability. Hand-crank projection and caster sweep are not included in the comparison.
Read the first-party listing ↗48 × 24 in · published product dimensions. Height: 28.5–42 in.
Published load statement: 1,000 lb total, evenly distributed, standard leveling feet.
Assembled dimensions, not the separately listed inner dimensions. Optional WEB270 casters have a separate 500 lb per-set rating; the bench rating cannot be transferred to a wheeled configuration.
Read the first-party listing ↗72 × 25 in · published product dimensions. Height: 28.5–42 in.
Published load statement: 2,000 lb total, evenly distributed, standard leveling feet.
Assembled dimensions, not the separately listed inner dimensions. Optional WEB270 casters have a separate 500 lb per-set rating; confirm the complete configuration.
Read the first-party listing ↗48 × 25 in · published product dimensions. Height: 27.5–40.8 in.
Published load statement: 3,000 lb per unit, maximum distributed load.
Distributed load is not an equipment-foot or point-load rating. Confirm clear top area, support placement, levelness and current assembly instructions.
Read the first-party listing ↗72 × 25 in · published product dimensions. Height: 27.5–40.8 in.
Published load statement: 3,000 lb per unit, maximum distributed load.
Distributed load is not an equipment-foot or point-load rating. Extra width does not compensate for inadequate depth.
Read the first-party listing ↗72 × 30 in · published tabletop dimensions. Height: 30–37 in.
Published load statement: 500 lb main capacity; distribution unspecified. Optional casters reduce capacity to 450 lb.
Bottom shelf has a separate 250 lb evenly distributed rating. Replacement top H-1137-SSTOP corroborates top dimensions. Point loads, legs, stability, surface suitability and operating requirements still need confirmation.
Read the first-party listing ↗We model published machine dimensions as a closed-body planning rectangle. Sources may not define every protrusion or lid position; this is not a traced silhouette. The P2S body-size source is xTool’s Australian technical-specification table, not a basis for regional electrical or package assumptions.
Weight ratings are preserved as manufacturer statements, not treated as a structural calculation. This is an organizational tool—not an engineering report, safety approval, or code certification.
Download full-size machine templates · Enter dimensions for a different bench · Plan the complete setup cost