Legacy / EOL owner reference
xTool M1 Ultra 20W
A record based on manufacturer sources for room and delivery planning. It does not certify the room, circuit, ventilation, material, or fire-safety setup.
Direct answer: the recorded closed body is 24.4 × 19.6 × 7.0 in / 620 × 498 × 178 mm; the unopened package is not fully published for a general current shipment. Operating clearance remains a separate check.
- Not a current purchase profile
- Profile reviewed
- No inferred package or clearance values
xTool announced that the M1 Ultra would be removed from official stores beginning in August 2026, with timing varying by region and inventory. This page remains available for existing owners and is not monetized as a current purchase option.
The published machine envelope
24.4 × 19.6 × 7.0 in / 620 × 498 × 178 mm
Manufacturer-published assembled envelope.
37.5 lb / 17 kg
Verify the complete operating load and supporting surface separately.
11.8 × 11.8 in / 300 × 300 mm laser area
Processing area is not the required room footprint.
Not published in cited sources
Do not substitute assembled dimensions for the unopened package.
Requirements to carry into the site plan
Route and connection
65 mm machine-side exhaust pipe; xTool gives special AP2 fan and filter instructions
Nameplate input
Machine input 25 VDC, 8 A, 200 W; adapter input 100–240 VAC, 50/60 Hz
Cooling components
Confirm accessory-specific requirements
Access in use
No numeric lid or service clearance published in cited sources.
Open checks remain part of the answer.
Get the shipping dimensions.
Not published in cited sources. Ask the seller or manufacturer for the exact packaged width, depth, height and weight for the SKU being delivered.
Measure access in use.
No numeric lid or service clearance published in cited sources. Any optional room allowance is user-selected and is not a manufacturer minimum.
- Legacy/EOL profile retained for owners and historical planning. xTool announced removal from official stores beginning in August 2026, varying by region and inventory.
- Do not retain the machine's filter or fan when using AP2 unless current xTool instructions say otherwise.
Plan the accessories that change the room.
Compatibility below comes from the cited manufacturer material. Every accessory still needs its own footprint, load, delivery and operating-path check.
SafetyPro IF2 2.0 Inline Duct Fan
A powered inline exhaust component with a published 3-inch duct and 2.3 m flexible duct.
Open sourced profile →filtrationSafetyPro AP2 Air Purifier
A floor or low-shelf filtration unit with published 150 m³/h airflow and four airflow levels.
Open sourced profile →filtrationDesktop Air Purifier
A compact purifier option for selected desktop machines; M2 requires the specified adapter.
Open sourced profile →Use the measurements in context.
Delivery-path calculator
Enter the exact current package evidence manually and test every rectangular opening in route order.
Scale drawingWorkshop layout planner
Enter the current closed-body dimensions manually, then place the support, operating zone, air-management equipment, and keep-clear rectangle.
PlacementOperating-footprint planner
Add documented lid, service and material allowances to the closed footprint.
ExhaustVent-route planner
Enter the current machine note manually, then map segments, bends, transitions, endpoint, and confirmations without guessing airflow.
UtilitiesElectrical pre-check
Inventory the machine and accessory nameplates for a qualified electrician.
TemplateWorkshop planning record
Lay out the support, operating zone, accessories, and electrical-load inventory together.
Compare another room-planning envelope.
- xTool F2 15W diode + 5W IR — 6.89 × 9.33 × 13.15 in / 175 × 237 × 334 mm
- xTool F1 Ultra — 10.75 × 14.69 × 19.37 in / 273 × 373 × 492 mm on the product page; the user guide lists 493 × 253 × 373 mm without axis labels
- xTool F2 Ultra Single 60W MOPA — 11.57 × 16.88 × 20.51 in / 294 × 429 × 521 mm used for conservative display; the support guide lists 520 mm
- Compare P3, P2S, S1, and M2 room requirements
Manufacturer sources used for this profile
Source links are editorial evidence, not paid links. Open the current source and match it to the exact region, model, and configuration.
Common room-planning questions about M1 Ultra 20W
What are the published xTool M1 Ultra 20W dimensions?
The recorded closed-body envelope is 24.4 × 19.6 × 7.0 in / 620 × 498 × 178 mm. It does not include lid, service, duct, accessory, or material-travel clearance.
Are xTool M1 Ultra 20W shipping dimensions published?
A verified general shipping envelope is not published in the cited sources. The current record says: Not published in cited sources. Ask for the exact shipped SKU and bundle.
How much room does xTool M1 Ultra 20W need?
The closed body is only the starting envelope. No numeric lid or service clearance published in cited sources. Measure the lid, controls, access panels, exhaust, cables, accessories, material travel, egress, and service access in the actual arrangement.
What exhaust and electrical evidence is recorded for xTool M1 Ultra 20W?
Exhaust: 65 mm machine-side exhaust pipe; xTool gives special AP2 fan and filter instructions Electrical: Machine input 25 VDC, 8 A, 200 W; adapter input 100–240 VAC, 50/60 Hz These notes organize confirmation and do not approve a ventilation or electrical design.
Verify the exact machine and accessory nameplates, grounding, circuit and local requirements with a licensed electrician. Install exhaust exactly as the manufacturer directs and resolve discharge, filtration and material emissions under applicable rules. Never leave active processing unattended.