Skip to main content
LaserRoomReady
Menu
Check my space

Shipping evidence · xTool P2S

xTool P2S Shipping Box Dimensions: What to Verify

An official xTool education listing publishes carton dimensions of 1122 × 727 × 346 mm, or approximately 44.17 × 28.62 × 13.62 in. Treat them as evidence for that cited listing—not a promise for every P2S SKU, regional packaging, or accessory bundle.

  • Official xTool sources
  • Original calculations
  • Reviewed 2026-09-09
  • No hands-on performance claim
01 · Published facts

Start with the documented envelope.

Cited carton

1122 × 727 × 346 mm

44.17 × 28.62 × 13.62 in

Published body

1000 × 639 × 268 mm

Machine and carton are different planning envelopes

Bounding volume

About 0.282 m³ / 10.0 ft³

Calculated rectangular bound, not freight volume billing

Package weight

Unresolved

Request it for the exact order

02 · Original calculation

How the cited carton differs from the assembled body

  • The carton bounds are 122 mm wider, 88 mm deeper, and 78 mm higher than the published machine body.
  • The rectangular carton bound is approximately 0.282 m³; actual packaging shape and handling features may differ.
  • A 30-inch / 762 mm opening leaves about 35 mm / 1.38 in across the 727 mm carton side before handling clearance.
  • An accessory bundle can change the number, size, and weight of shipped packages.
Calculated does not mean manufacturer-approved.

Arithmetic can expose a conflict or tight margin. It cannot establish support suitability, delivery handling, operating clearance, ventilation, electrical capacity, fire protection or code compliance.

03 · Use it in the room

Turn the comparison into a measured plan.

  1. Match the cited listing to the exact region, SKU, and bundle on the purchase order.
  2. Request width, depth, height, weight, handling orientation, and package count in writing.
  3. Measure the clear route and identify every turn or elevation change.
  4. Replace the example carton values in the checker when the seller supplies order-specific data.
Room first

Compare every supported profile

Enter one surface and room zone, then order candidates by evidence and fit rather than price.

Full report

Check the featured model

Carry the model into delivery, surface, room, exhaust and utility checks.

Complete handoff

Laser-room setup checklist

Carry the calculation into delivery, operating space, air path, utilities, materials, and confirmations.

Total cost

xTool setup-cost builder

Record machine, air-management, attachment, support, site, shipping, tax, and material costs.

Launch alternative

X1 vs P2S vs P3 tracker

Separate published X1 facts from purchase and room details that remain unknown.

Purchase research

xTool buying options

Compare official listings after the room and configuration questions are visible.

04 · Open evidence

Keep these questions unresolved until confirmed.

  • Package weight is not stated in the cited listing.
  • The carton data is listing-specific and may not represent a standard retail or bundled shipment.
  • Pallet dimensions, lift-gate requirements, and delivery-service limits are separate freight questions.
This page is not a product review.

LaserRoomReady has not physically tested the featured machines. It compares cited room-planning evidence and original calculations only.

05 · Questions people ask

Direct answers, with the boundary intact.

Why doesn't the main profile automatically use these dimensions?

The value comes from a specific education listing. The general profile stays unresolved so it does not silently apply one bundle's carton to every order.

Can I use assembled dimensions for delivery?

No. The unopened carton and any pallet or accessory packages are the relevant delivery envelopes.

06 · Evidence

Manufacturer sources used on this page

01
xTool P2 education listing with carton dimensionsChecked 2026-09-09
02
xTool P2S product pageChecked 2026-09-09
07 · Current configurations

Continue only after the room questions are visible.

These merchant links are clearly labeled. LaserRoomReady may earn a commission at no extra cost to you if you buy through one. Compensation does not change the calculations or display order.

Related planning pages